harmony 鸿蒙@ohos.telephony.radio (Radio) (System API)
@ohos.telephony.radio (Radio) (System API)
The radio module provides basic network search management functions. You can obtain the radio access technology (RAT) used in the CS and PS domains, network status, current network selection mode, ISO country code of the registered network, ID of the slot in which the primary card is located, list of signal strengths of the registered network, carrier name, and IMEI, MEID, and unique device ID of the SIM card in the specified slot. Besides, you can check whether the current device supports 5G(NR) and whether the radio service is enabled on the primary SIM card.
NOTE
The initial APIs of this module are supported since API version 6. Newly added APIs will be marked with a superscript to indicate their earliest API version. This topic describes only system APIs provided by the module. For details about its public APIs, see @ohos.telephony.radio (Radio).
Modules to Import
import { radio } from '@kit.TelephonyKit';
radio.setPrimarySlotId8+
setPrimarySlotId(slotId: number, callback: AsyncCallback<void>): void
Sets the ID of the slot in which the primary card is located. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300004 | No SIM card found. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.setPrimarySlotId(slotId, (err: BusinessError) => {
if (err) {
console.error(`setPrimarySlotId failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`setPrimarySlotId success.`);
});
radio.setPrimarySlotId8+
setPrimarySlotId(slotId: number): Promise<void>
Sets the ID of the slot in which the primary card is located. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<void> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300004 | No SIM card found. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.setPrimarySlotId(slotId).then(() => {
console.log(`setPrimarySlotId success.`);
}).catch((err: BusinessError) => {
console.error(`setPrimarySlotId failed, promise: err->${JSON.stringify(err)}`);
});
radio.getIMEI8+
getIMEI(callback: AsyncCallback<string>): void
Obtains the IMEI of the primary SIM card of the device. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
callback | AsyncCallback<string> | Yes | Callback used to return the result. If the IMEI does not exist, an empty string is returned. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
radio.getIMEI((err: BusinessError, data: string) => {
if (err) {
console.error(`getIMEI failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getIMEI success, callback: data->${JSON.stringify(data)}`);
});
radio.getIMEI8+
getIMEI(slotId: number, callback: AsyncCallback<string>): void
Obtains the IMEI of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<string> | Yes | Callback used to return the result. If the IMEI does not exist, an empty string is returned. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getIMEI(slotId, (err: BusinessError, data: string) => {
if (err) {
console.error(`getIMEI failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getIMEI success, callback: data->${JSON.stringify(data)}`);
});
radio.getIMEI8+
getIMEI(slotId?: number): Promise<string>
Obtains the IMEI of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | No | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<string> | Promise used to return the result. If the IMEI does not exist, an empty string is returned. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getIMEI(slotId).then((data: string) => {
console.log(`getIMEI success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getIMEI failed, promise: err->${JSON.stringify(err)}`);
});
radio.getMEID8+
getMEID(callback: AsyncCallback<string>): void
Obtains the MEID of the SIM card. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
callback | AsyncCallback<string> | Yes | Callback used to return the result. If the MEID does not exist, an empty string is returned. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
radio.getMEID((err: BusinessError, data: string) => {
if (err) {
console.error(`getMEID failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getMEID success, callback: data->${JSON.stringify(data)}`);
});
radio.getMEID8+
getMEID(slotId: number, callback: AsyncCallback<string>): void
Obtains the MEID of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<string> | Yes | Callback used to return the result. If the MEID does not exist, an empty string is returned. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getMEID(slotId, (err: BusinessError, data: string) => {
if (err) {
console.error(`getMEID failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getMEID success, callback: data->${JSON.stringify(data)}`);
});
radio.getMEID8+
getMEID(slotId?: number): Promise<string>
Obtains the MEID of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | No | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<string> | Promise used to return the result. If the MEID does not exist, an empty string is returned. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getMEID(slotId).then((data: string) => {
console.log(`getMEID success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getMEID failed, promise: err->${JSON.stringify(err)}`);
});
radio.getUniqueDeviceId8+
getUniqueDeviceId(callback: AsyncCallback<string>): void
Obtains the unique device ID of the primary SIM card of the device. This API uses an asynchronous callback to return the result.
If the device registers with a 3GPP network, an IMEI is returned. If the device registers with a 3GPP2 network, an MEID is returned.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
callback | AsyncCallback<string> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
radio.getUniqueDeviceId((err: BusinessError, data: string) => {
if (err) {
console.error(`getUniqueDeviceId failed, callback: err->${JSON.stringify(err)}}`);
return;
}
console.log(`getUniqueDeviceId success, callback: data->${JSON.stringify(data)}`);
});
radio.getUniqueDeviceId8+
getUniqueDeviceId(slotId: number, callback: AsyncCallback<string>): void
Obtains the unique device ID of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
If the device registers with a 3GPP network, an IMEI is returned. If the device registers with a 3GPP2 network, an MEID is returned.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<string> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getUniqueDeviceId(slotId, (err: BusinessError, data: string) => {
if (err) {
console.error(`getUniqueDeviceId failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getUniqueDeviceId success, callback: data->${JSON.stringify(data)}`);
});
radio.getUniqueDeviceId8+
getUniqueDeviceId(slotId?: number): Promise<string>
Obtains the unique device ID of the SIM card in the specified slot. This API uses a promise to return the result.
If the device registers with a 3GPP network, an IMEI is returned. If the device registers with a 3GPP2 network, an MEID is returned.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | No | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<string> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getUniqueDeviceId(slotId).then((data: string) => {
console.log(`getUniqueDeviceId success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getUniqueDeviceId failed, promise: err->${JSON.stringify(err)}`);
});
radio.sendUpdateCellLocationRequest8+
sendUpdateCellLocationRequest(callback: AsyncCallback<void>): void
Sends a cell location update request. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permissions: ohos.permission.LOCATION and ohos.permission.APPROXIMATELY_LOCATION
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
radio.sendUpdateCellLocationRequest((err: BusinessError) => {
if (err) {
console.error(`sendUpdateCellLocationRequest failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`sendUpdateCellLocationRequest success.`);
});
radio.sendUpdateCellLocationRequest8+
sendUpdateCellLocationRequest(slotId: number, callback: AsyncCallback<void>): void
Sends a cell location update request for the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permissions: ohos.permission.LOCATION and ohos.permission.APPROXIMATELY_LOCATION
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.sendUpdateCellLocationRequest(slotId, (err: BusinessError) => {
if (err) {
console.error(`sendUpdateCellLocationRequest failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`sendUpdateCellLocationRequest success.`);
});
radio.sendUpdateCellLocationRequest8+
sendUpdateCellLocationRequest(slotId?: number): Promise<void>
Sends a cell location update request for the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permissions: ohos.permission.LOCATION and ohos.permission.APPROXIMATELY_LOCATION
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | No | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<void> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.sendUpdateCellLocationRequest(slotId).then(() => {
console.log(`sendUpdateCellLocationRequest success.`);
}).catch((err: BusinessError) => {
console.error(`sendUpdateCellLocationRequest failed, promise: err->${JSON.stringify(err)}`);
});
radio.getCellInformation8+
getCellInformation(callback: AsyncCallback<Array<CellInformation>>): void
Obtains cell information. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permissions: ohos.permission.LOCATION and ohos.permission.APPROXIMATELY_LOCATION
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
callback | AsyncCallback<Array<CellInformation>> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
radio.getCellInformation((err: BusinessError, data: Array<radio.CellInformation>) => {
if (err) {
console.error(`getCellInformation failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getCellInformation success, callback: data->${JSON.stringify(data)}`);
});
radio.getCellInformation8+
getCellInformation(slotId: number, callback: AsyncCallback<Array<CellInformation>>): void
Obtains cell information of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permissions: ohos.permission.LOCATION and ohos.permission.APPROXIMATELY_LOCATION
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<Array<CellInformation>> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getCellInformation(slotId, (err: BusinessError, data: Array<radio.CellInformation>) => {
if (err) {
console.error(`getCellInformation failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getCellInformation success, callback: data->${JSON.stringify(data)}`);
});
radio.getCellInformation8+
getCellInformation(slotId?: number): Promise<Array<CellInformation>>
Obtains cell information of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permissions: ohos.permission.LOCATION and ohos.permission.APPROXIMATELY_LOCATION
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | No | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<Array<CellInformation>> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getCellInformation(slotId).then((data: Array<radio.CellInformation>) => {
console.log(`getCellInformation success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getCellInformation failed, promise: err->${JSON.stringify(err)}`);
});
radio.setNetworkSelectionMode
setNetworkSelectionMode(options: NetworkSelectionModeOptions, callback: AsyncCallback<void>): void
Sets the network selection mode. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
options | NetworkSelectionModeOptions | Yes | Network selection mode. |
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let networkInformation: radio.NetworkInformation = {
operatorName: "China Mobile",
operatorNumeric: "898600",
state: radio.NetworkInformationState.NETWORK_AVAILABLE,
radioTech: "CS"
}
let networkSelectionModeOptions: radio.NetworkSelectionModeOptions = {
slotId: 0,
selectMode: radio.NetworkSelectionMode.NETWORK_SELECTION_AUTOMATIC,
networkInformation: networkInformation,
resumeSelection: true
}
radio.setNetworkSelectionMode(networkSelectionModeOptions, (err: BusinessError) => {
if (err) {
console.error(`setNetworkSelectionMode failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`setNetworkSelectionMode success.`);
});
radio.setNetworkSelectionMode
setNetworkSelectionMode(options: NetworkSelectionModeOptions): Promise<void>
Sets the network selection mode. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
options | NetworkSelectionModeOptions | Yes | Network selection mode. |
Return value
Type | Description |
---|---|
Promise<void> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let networkInformation: radio.NetworkInformation = {
operatorName: "China Mobile",
operatorNumeric: "898600",
state: radio.NetworkInformationState.NETWORK_AVAILABLE,
radioTech: "CS"
}
let networkSelectionModeOptions: radio.NetworkSelectionModeOptions = {
slotId: 0,
selectMode: radio.NetworkSelectionMode.NETWORK_SELECTION_AUTOMATIC,
networkInformation: networkInformation,
resumeSelection: true
}
radio.setNetworkSelectionMode(networkSelectionModeOptions).then(() => {
console.log(`setNetworkSelectionMode success.`);
}).catch((err: BusinessError) => {
console.error(`setNetworkSelectionMode failed, promise: err->${JSON.stringify(err)}`);
});
radio.getNetworkSearchInformation
getNetworkSearchInformation(slotId: number, callback: AsyncCallback<NetworkSearchResult>): void
Obtains network search information of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<NetworkSearchResult> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
radio.getNetworkSearchInformation(0, (err: BusinessError, data: radio.NetworkSearchResult) => {
if (err) {
console.error(`getNetworkSearchInformation failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getNetworkSearchInformation success, callback: data->${JSON.stringify(data)}`);
});
radio.getNetworkSearchInformation
getNetworkSearchInformation(slotId: number): Promise<NetworkSearchResult>
Obtains network search information of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<NetworkSearchResult> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
radio.getNetworkSearchInformation(0).then((data: radio.NetworkSearchResult) => {
console.log(`getNetworkSearchInformation success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getNetworkSearchInformation failed, promise: err->${JSON.stringify(err)}`);
});
radio.getNrOptionMode(deprecated)
getNrOptionMode(callback: AsyncCallback<NrOptionMode>): void
Obtains the NR option mode of the SIM card. This API uses an asynchronous callback to return the result.
NOTE
This API is supported since API version 8 and deprecated since API version 10. You are advised to use getNROptionMode.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
callback | AsyncCallback<NrOptionMode> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
radio.getNrOptionMode((err: BusinessError, data: radio.NrOptionMode) => {
if (err) {
console.error(`getNrOptionMode failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getNrOptionMode success, callback: data->${JSON.stringify(data)}`);
});
radio.getNrOptionMode(deprecated)
getNrOptionMode(slotId: number, callback: AsyncCallback<NrOptionMode>): void
Obtains the NR option mode of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
NOTE
This API is supported since API version 8 and deprecated since API version 10. You are advised to use getNROptionMode.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<NrOptionMode> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getNrOptionMode(slotId, (err: BusinessError, data: radio.NrOptionMode) => {
if (err) {
console.error(`getNrOptionModecallback failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getNrOptionModecallback success, callback: data->${JSON.stringify(data)}`);
});
radio.getNrOptionMode(deprecated)
getNrOptionMode(slotId?: number): Promise<NrOptionMode>
Obtains the NR option mode of the SIM card in the specified slot. This API uses a promise to return the result.
NOTE
This API is supported since API version 8 and deprecated since API version 10. You are advised to use getNROptionMode.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | No | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<NrOptionMode> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getNrOptionMode(slotId).then((data: radio.NrOptionMode) => {
console.log(`getNrOptionMode success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getNrOptionMode failed, promise: err->${JSON.stringify(err)}`);
});
radio.turnOnRadio7+
turnOnRadio(callback: AsyncCallback<void>): void
Turns on the radio function. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
radio.turnOnRadio((err: BusinessError) => {
if (err) {
console.error(`turnOnRadio failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`turnOnRadio success.`);
});
radio.turnOnRadio7+
turnOnRadio(slotId: number, callback: AsyncCallback<void>): void
Enables the radio service for the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.turnOnRadio(slotId, (err: BusinessError) => {
if (err) {
console.error(`turnOnRadio failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`turnOnRadio success.`);
});
radio.turnOnRadio7+
turnOnRadio(slotId?: number): Promise<void>
Turns on the radio function for the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | No | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<void> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.turnOnRadio(slotId).then(() => {
console.log(`turnOnRadio success.`);
}).catch((err: BusinessError) => {
console.error(`turnOnRadio failed, promise: err->${JSON.stringify(err)}`);
});
radio.turnOffRadio7+
turnOffRadio(callback: AsyncCallback<void>): void
Turns off the radio function. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
radio.turnOffRadio((err: BusinessError) => {
if (err) {
console.error(`turnOffRadio failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`turnOffRadio success.`);
});
radio.turnOffRadio7+
turnOffRadio(slotId: number, callback: AsyncCallback<void>): void
Disables the radio service for the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.turnOffRadio(slotId, (err: BusinessError) => {
if (err) {
console.error(`turnOffRadio failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`turnOffRadio success.`);
});
radio.turnOffRadio7+
turnOffRadio(slotId?: number): Promise<void>
Turns off the radio function for the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | No | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<void> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.turnOffRadio(slotId).then(() => {
console.log(`turnOffRadio success.`);
}).catch((err: BusinessError) => {
console.error(`turnOffRadio failed, promise: err->${JSON.stringify(err)}`);
});
radio.setPreferredNetwork8+
setPreferredNetwork(slotId: number, networkMode: PreferredNetworkMode, callback: AsyncCallback<void>): void
Sets the preferred network of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
networkMode | PreferredNetworkMode | Yes | Preferred network mode. |
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
let mode: radio.PreferredNetworkMode = radio.PreferredNetworkMode.PREFERRED_NETWORK_MODE_GSM;
radio.setPreferredNetwork(slotId, mode, (err: BusinessError) => {
if (err) {
console.error(`setPreferredNetwork failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`setPreferredNetwork success.`);
});
radio.setPreferredNetwork8+
setPreferredNetwork(slotId: number, networkMode: PreferredNetworkMode): Promise<void>
Sets the preferred network of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
networkMode | PreferredNetworkMode | Yes | Preferred network mode. |
Return value
Type | Description |
---|---|
Promise<void> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
let mode: radio.PreferredNetworkMode = radio.PreferredNetworkMode.PREFERRED_NETWORK_MODE_GSM;
radio.setPreferredNetwork(slotId, mode).then(() => {
console.log(`setPreferredNetwork success.`);
}).catch((err: BusinessError) => {
console.error(`setPreferredNetwork failed, promise: err->${JSON.stringify(err)}`);
});
radio.getPreferredNetwork8+
getPreferredNetwork(slotId: number, callback: AsyncCallback<PreferredNetworkMode>): void
Obtains the preferred network of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<PreferredNetworkMode> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getPreferredNetwork(slotId, (err: BusinessError, data: radio.PreferredNetworkMode) => {
if (err) {
console.error(`getPreferredNetwork failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getPreferredNetwork success, callback: data->${JSON.stringify(data)}`);
});
radio.getPreferredNetwork8+
getPreferredNetwork(slotId: number): Promise<PreferredNetworkMode>
Obtains the preferred network of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<PreferredNetworkMode> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getPreferredNetwork(slotId).then((data: radio.PreferredNetworkMode) => {
console.log(`getPreferredNetwork success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getPreferredNetwork failed, promise: err->${JSON.stringify(err)}`);
});
radio.getImsRegInfo9+
getImsRegInfo(slotId: number, imsType: ImsServiceType, callback: AsyncCallback<ImsRegInfo>): void
Obtains the IMS registration status of the specified IMS service type for the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
imsType | ImsServiceType | Yes | IMS service type. |
callback | AsyncCallback<ImsRegInfo> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: Mandatory parameters are left unspecified. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
let mode: radio.ImsServiceType = radio.ImsServiceType.TYPE_VIDEO;
radio.getImsRegInfo(slotId, mode, (err: BusinessError, data: radio.ImsRegInfo) => {
if (err) {
console.error(`getImsRegInfo failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getImsRegInfo success, callback: data->${JSON.stringify(data)}`);
});
radio.getImsRegInfo9+
getImsRegInfo(slotId: number, imsType: ImsServiceType): Promise<ImsRegInfo>
Obtains the IMS registration status of the specified IMS service type for the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
imsType | ImsServiceType | Yes | IMS service type. |
Return value
Type | Description |
---|---|
Promise<ImsRegInfo> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: Mandatory parameters are left unspecified. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
let mode: radio.ImsServiceType = radio.ImsServiceType.TYPE_VIDEO;
radio.getImsRegInfo(slotId, mode).then((data: radio.ImsRegInfo) => {
console.log(`getImsRegInfo success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getImsRegInfo failed, promise: err->${JSON.stringify(err)}`);
});
radio.on(‘imsRegStateChange’)9+
on(type: ‘imsRegStateChange’, slotId: number, imsType: ImsServiceType, callback: Callback<ImsRegInfo>): void
Enables listening for imsRegStateChange events of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
type | string | Yes | IMS registration status change. This field has a fixed value of imsRegStateChange. |
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
imsType | ImsServiceType | Yes | IMS service type. |
callback | Callback<ImsRegInfo> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: Mandatory parameters are left unspecified. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
let slotId: number = 0;
let mode: radio.ImsServiceType = radio.ImsServiceType.TYPE_VIDEO;
radio.on('imsRegStateChange', slotId, mode, (data: radio.ImsRegInfo) => {
console.log(`on imsRegStateChange success, callback: data->${JSON.stringify(data)}`);
});
radio.off(‘imsRegStateChange’)9+
off(type: ‘imsRegStateChange’, slotId: number, imsType: ImsServiceType, callback?: Callback<ImsRegInfo>): void
Disables listening for imsRegStateChange events of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
type | string | Yes | IMS registration status change. This field has a fixed value of imsRegStateChange. |
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
imsType | ImsServiceType | Yes | IMS service type. |
callback | Callback<ImsRegInfo> | No | Callback used to return the result. If it is left unspecified, it indicates the callback for all the events will be unsubscribed. The value must be the same as the value of callback in on(‘imsRegStateChange’). |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: Mandatory parameters are left unspecified. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
let slotId: number = 0;
let mode: radio.ImsServiceType = radio.ImsServiceType.TYPE_VIDEO;
radio.off('imsRegStateChange', slotId, mode, (data: radio.ImsRegInfo) => {
console.log(`off imsRegStateChange success, callback: data->${JSON.stringify(data)}`);
});
radio.getBasebandVersion10+
getBasebandVersion(slotId: number, callback: AsyncCallback<string>): void
Obtains the device baseband version of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<string> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getBasebandVersion(slotId, (err: BusinessError, data: string) => {
if (err) {
console.error(`getBasebandVersion failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getBasebandVersion success, callback: data->${JSON.stringify(data)}`);
});
radio.getBasebandVersion10+
getBasebandVersion(slotId: number): Promise<string>
Obtains the device baseband version of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<string> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getBasebandVersion(slotId).then((data: string) => {
console.log(`getBasebandVersion success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getBasebandVersion failed, promise: err->${JSON.stringify(err)}`);
});
radio.setNROptionMode10+
setNROptionMode(slotId: number, mode: NROptionMode, callback: AsyncCallback<void>): void
Sets the NR mode of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
mode | NROptionMode | Yes | Enumerates NR selection modes. |
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
let mode: radio.NROptionMode = radio.NROptionMode.NR_OPTION_NSA_ONLY;
radio.setNROptionMode(slotId, mode, (err: BusinessError) => {
if (err) {
console.error(`setNROptionMode failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`setNROptionMode success.`);
});
radio.setNROptionMode10+
setNROptionMode(slotId: number, mode: NROptionMode): Promise<void>
Sets the NR mode of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
mode | NROptionMode | Yes | NR mode. |
Return value
Type | Description |
---|---|
Promise<void> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
let mode: radio.NROptionMode = radio.NROptionMode.NR_OPTION_NSA_ONLY;
radio.setNROptionMode(slotId, mode).then(() => {
console.log(`setNROptionMode success`);
}).catch((err: BusinessError) => {
console.error(`setNROptionMode failed, promise: err->${JSON.stringify(err)}`);
});
radio.getNROptionMode10+
getNROptionMode(slotId: number, callback: AsyncCallback<NROptionMode>): void
Obtains the NR option mode of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
callback | AsyncCallback<NROptionMode> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getNROptionMode(slotId, (err: BusinessError, data: radio.NROptionMode) => {
if (err) {
console.error(`getNROptionMode failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getNROptionMode success, callback: data->${JSON.stringify(data)}`);
});
radio.getNROptionMode10+
getNROptionMode(slotId: number): Promise<NROptionMode>
Obtains the NR option mode of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<NROptionMode> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.getNROptionMode(slotId).then((data: radio.NROptionMode) => {
console.log(`getNROptionMode success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getNROptionMode failed, promise: err->${JSON.stringify(err)}`);
});
radio.getNetworkCapability10+
getNetworkCapability(slotId: number, type: NetworkCapabilityType, callback: AsyncCallback<NetworkCapabilityState>): void
Obtains the network capability of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
type | NetworkCapabilityType | Yes | Network capability type. |
callback | AsyncCallback<NetworkCapabilityState> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
let type: radio.NetworkCapabilityType = radio.NetworkCapabilityType.SERVICE_TYPE_NR;
radio.getNetworkCapability(slotId, type, (err: BusinessError, data: radio.NetworkCapabilityState) => {
if (err) {
console.error(`getNetworkCapability failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`getNetworkCapability success, callback: err->${JSON.stringify(err)}`);
});
radio.getNetworkCapability10+
getNetworkCapability(slotId: number, type: NetworkCapabilityType): Promise<NetworkCapabilityState>
Obtains the network capability of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
type | NetworkCapabilityType | Yes | Network capability type. |
Return value
Type | Description |
---|---|
Promise<NetworkCapabilityState> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
let type: radio.NetworkCapabilityType = radio.NetworkCapabilityType.SERVICE_TYPE_NR;
radio.getNetworkCapability(slotId, type).then((data: radio.NetworkCapabilityState) => {
console.log(`getNetworkCapability success, promise: data->${JSON.stringify(data)}`);
}).catch((err: BusinessError) => {
console.error(`getNetworkCapability failed, promise: err->${JSON.stringify(err)}`);
});
radio.setNetworkCapability10+
setNetworkCapability(slotId: number, type: NetworkCapabilityType, state: NetworkCapabilityState, callback: AsyncCallback<void>): void
Sets the network capability of the SIM card in the specified slot. This API uses an asynchronous callback to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
type | NetworkCapabilityType | Yes | Network capability type. |
state | NetworkCapabilityState | Yes | Network capability status. |
callback | AsyncCallback<void> | Yes | Callback used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
let type: radio.NetworkCapabilityType = radio.NetworkCapabilityType.SERVICE_TYPE_NR;
let state: radio.NetworkCapabilityState = radio.NetworkCapabilityState.SERVICE_CAPABILITY_ON;
radio.setNetworkCapability(slotId, type, state, (err: BusinessError) => {
if (err) {
console.error(`setNetworkCapability failed, callback: err->${JSON.stringify(err)}`);
return;
}
console.log(`setNetworkCapability success.`);
});
radio.setNetworkCapability10+
setNetworkCapability(slotId: number, type: NetworkCapabilityType, state: NetworkCapabilityState): Promise<void>
Sets the network capability of the SIM card in the specified slot. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
type | NetworkCapabilityType | Yes | Network capability type. |
state | NetworkCapabilityState | Yes | Network capability status. |
Return value
Type | Description |
---|---|
Promise<void> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
let type: radio.NetworkCapabilityType = radio.NetworkCapabilityType.SERVICE_TYPE_NR;
let state: radio.NetworkCapabilityState = radio.NetworkCapabilityState.SERVICE_CAPABILITY_ON;
radio.setNetworkCapability(slotId, type, state).then(() => {
console.log(`setNetworkCapability success`);
}).catch((err: BusinessError) => {
console.error(`setNetworkCapability failed, promise: err->${JSON.stringify(err)}`);
});
radio.factoryReset11+
factoryReset(slotId: number): Promise<void>
Restores the radio service to factory settings. This API uses a promise to return the result.
System API: This is a system API.
Required permission: ohos.permission.SET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Return value
Type | Description |
---|---|
Promise<void> | Promise used to return the result. |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
import { BusinessError } from '@kit.BasicServicesKit';
let slotId: number = 0;
radio.factoryReset(slotId).then(() => {
console.log(`factoryReset success`);
}).catch((err: BusinessError) => {
console.error(`factoryReset failed, promise: err->${JSON.stringify(err)}`);
});
radio.getIMEISV12+
getIMEISV(slotId: number): string
Obtains the software version of the SIM card in the specified slot.
System API: This is a system API.
Required permission: ohos.permission.GET_TELEPHONY_STATE
System capability: SystemCapability.Telephony.CoreService
Parameters
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | No | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
Error codes
For details about the error codes, seeohos.telephony (Telephony) Error Codes.
ID | Error Message |
---|---|
201 | Permission denied. |
202 | Non-system applications use system APIs. |
401 | Parameter error. Possible causes: 1. Mandatory parameters are left unspecified. 2. Incorrect parameter types. |
8300001 | Invalid parameter value. |
8300002 | Service connection failed. |
8300003 | System internal error. |
8300999 | Unknown error. |
Example
let slotId: number = 0;
let data: string = radio.getIMEISV(slotId);
console.log(`IMEISV is:` + data);
PreferredNetworkMode8+
Enumerates preferred network modes.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Value | Description |
---|---|---|
PREFERRED_NETWORK_MODE_GSM | 1 | GSM network mode. |
PREFERRED_NETWORK_MODE_WCDMA | 2 | WCDMA network mode. |
PREFERRED_NETWORK_MODE_LTE | 3 | LTE network mode. |
PREFERRED_NETWORK_MODE_LTE_WCDMA | 4 | LTE+WCDMA network mode. |
PREFERRED_NETWORK_MODE_LTE_WCDMA_GSM | 5 | LTE+WCDMA+GSM network mode. |
PREFERRED_NETWORK_MODE_WCDMA_GSM | 6 | WCDMA+GSM network mode. |
PREFERRED_NETWORK_MODE_CDMA | 7 | CDMA network mode. |
PREFERRED_NETWORK_MODE_EVDO | 8 | EVDO network mode. |
PREFERRED_NETWORK_MODE_EVDO_CDMA | 9 | EVDO+CDMA network mode. |
PREFERRED_NETWORK_MODE_WCDMA_GSM_EVDO_CDMA | 10 | WCDMA+GSM+EVDO+CDMA network mode. |
PREFERRED_NETWORK_MODE_LTE_EVDO_CDMA | 11 | LTE+EVDO+CDMA network mode. |
PREFERRED_NETWORK_MODE_LTE_WCDMA_GSM_EVDO_CDMA | 12 | LTE+WCDMA+GSM+EVDO+CDMA network mode. |
PREFERRED_NETWORK_MODE_TDSCDMA | 13 | TD-SCDMA network mode. |
PREFERRED_NETWORK_MODE_TDSCDMA_GSM | 14 | TD-SCDMA+GSM network mode. |
PREFERRED_NETWORK_MODE_TDSCDMA_WCDMA | 15 | TD-SCDMA+WCDMA network mode. |
PREFERRED_NETWORK_MODE_TDSCDMA_WCDMA_GSM | 16 | TD-SCDMA+WCDMA+GSM network mode. |
PREFERRED_NETWORK_MODE_LTE_TDSCDMA | 17 | LTE+TD-SCDMA network mode. |
PREFERRED_NETWORK_MODE_LTE_TDSCDMA_GSM | 18 | LTE+TD-SCDMA+GSM network mode. |
PREFERRED_NETWORK_MODE_LTE_TDSCDMA_WCDMA | 19 | LTE+TD-SCDMA+WCDMA network mode. |
PREFERRED_NETWORK_MODE_LTE_TDSCDMA_WCDMA_GSM | 20 | LTE+TD-SCDMA+WCDMA+GSM network mode. |
PREFERRED_NETWORK_MODE_TDSCDMA_WCDMA_GSM_EVDO_CDMA | 21 | TD-SCDMA+WCDMA+GSM+EVDO+CDMA network mode. |
PREFERRED_NETWORK_MODE_LTE_TDSCDMA_WCDMA_GSM_EVDO_CDMA | 22 | LTE+TD-SCDMA+WCDMA+GSM+EVDO+CDMA network mode. |
PREFERRED_NETWORK_MODE_NR | 31 | NR network mode. |
PREFERRED_NETWORK_MODE_NR_LTE | 32 | NR+LTE network mode. |
PREFERRED_NETWORK_MODE_NR_LTE_WCDMA | 33 | NR+LTE+WCDMA network mode. |
PREFERRED_NETWORK_MODE_NR_LTE_WCDMA_GSM | 34 | NR+LTE+WCDMA+GSM network mode. |
PREFERRED_NETWORK_MODE_NR_LTE_EVDO_CDMA | 35 | NR+LTE+EVDO+CDMA network mode. |
PREFERRED_NETWORK_MODE_NR_LTE_WCDMA_GSM_EVDO_CDMA | 36 | NR+LTE+WCDMA+GSM+EVDO+CDMA network mode. |
PREFERRED_NETWORK_MODE_NR_LTE_TDSCDMA | 37 | NR+LTE+TD-SCDMA network mode. |
PREFERRED_NETWORK_MODE_NR_LTE_TDSCDMA_GSM | 38 | NR+LTE+TD-SCDMA+GSM network mode. |
PREFERRED_NETWORK_MODE_NR_LTE_TDSCDMA_WCDMA | 39 | NR+LTE+TD-SCDMA+WCDMA network mode. |
PREFERRED_NETWORK_MODE_NR_LTE_TDSCDMA_WCDMA_GSM | 40 | NR+LTE+TD-SCDMA+WCDMA+GSM network mode. |
PREFERRED_NETWORK_MODE_NR_LTE_TDSCDMA_WCDMA_GSM_EVDO_CDMA | 41 | NR+LTE+TD-SCDMA+WCDMA+GSM+EVDO+CDMA network mode. |
PREFERRED_NETWORK_MODE_MAX_VALUE | 99 | Maximum value of the preferred network mode. |
CellInformation8+
Defines the cell information.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
isCamped | boolean | Yes | Cell status. System API: This is a system API. The value true indicates a camped cell, and the value false indicates a non-camped cell. |
timeStamp | number | Yes | Timestamp when cell information is obtained. System API: This is a system API. |
data | CdmaCellInformation |GsmCellInformation |LteCellInformation |NrCellInformation |TdscdmaCellInformation|WcdmaCellInformation | Yes | CDMA cell information|GSM cell information|LTE cell information|NR cell information|TD-SCDMA cell information|WCDMA. System API: This is a system API. |
CdmaCellInformation8+
Defines the CDMA cell information.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
baseId | number | Yes | Base station ID. |
latitude | number | Yes | Latitude. |
longitude | number | Yes | Longitude. |
nid | number | Yes | Network ID. |
sid | number | Yes | System ID. |
GsmCellInformation8+
Defines the GSM cell information.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
lac | number | Yes | Location area code. |
cellId | number | Yes | Cell ID. |
arfcn | number | Yes | Absolute radio frequency channel number. |
bsic | number | Yes | Base station ID. |
mcc | string | Yes | Mobile country code. |
mnc | string | Yes | Mobile network code. |
LteCellInformation8+
LTE cell information.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
cgi | number | Yes | Cell global identification. |
pci | number | Yes | Physical cell ID. |
tac | number | Yes | Tracking area code. |
earfcn | number | Yes | Absolute radio frequency channel number. |
bandwidth | number | Yes | Bandwidth. |
mcc | string | Yes | Mobile country code. |
mnc | string | Yes | Mobile network code. |
isSupportEndc | boolean | Yes | Whether New Radio Dual Connectivity (NR-DC) is supported. The value true indicates that NR-DC is supported, and the value false indicates the opposite. |
NrCellInformation8+
Defines the 5G NR cell information.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
nrArfcn | number | Yes | 5G frequency number. |
pci | number | Yes | Physical cell ID. |
tac | number | Yes | Tracking area code. |
nci | number | Yes | 5G network cell ID. |
mcc | string | Yes | Mobile country code. |
mnc | string | Yes | Mobile network code. |
TdscdmaCellInformation8+
Defines the TD-SCDMA cell information.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
lac | number | Yes | Location area code. |
cellId | number | Yes | Cell ID. |
cpid | number | Yes | Cell parameter ID. |
uarfcn | number | Yes | Absolute radio frequency number. |
mcc | string | Yes | Mobile country code. |
mnc | string | Yes | Mobile network code. |
WcdmaCellInformation8+
Defines the WCDMA cell information.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
lac | number | Yes | Location area code. |
cellId | number | Yes | Cell ID. |
psc | number | Yes | Primary scrambling code. |
uarfcn | number | Yes | Absolute radio frequency number. |
mcc | string | Yes | Mobile country code. |
mnc | string | Yes | Mobile network code. |
NrOptionMode(deprecated)
Enumerates NR selection modes.
NOTE
This API is supported since API version 8 and deprecated since API version 10. You are advised to use NROptionMode.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Value | Description |
---|---|---|
NR_OPTION_UNKNOWN | 0 | Unknown NR selection mode. |
NR_OPTION_NSA_ONLY | 1 | NR selection mode in 5G non-standalone networking. |
NR_OPTION_SA_ONLY | 2 | NR selection mode in 5G non-standalone networking. |
NR_OPTION_NSA_AND_SA | 3 | NR selection mode in non-standalone and standalone networking. |
NROptionMode10+
Enumerates NR selection modes.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Value | Description |
---|---|---|
NR_OPTION_UNKNOWN | 0 | Unknown NR selection mode. |
NR_OPTION_NSA_ONLY | 1 | NR selection mode in 5G non-standalone networking. |
NR_OPTION_SA_ONLY | 2 | NR selection mode in 5G non-standalone networking. |
NR_OPTION_NSA_AND_SA | 3 | NR selection mode in non-standalone and standalone networking. |
NetworkSearchResult
Defines the network search result.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
isNetworkSearchSuccess | boolean | Yes | Whether the network search is successful. The value true indicates that the network search is successful, and the value false indicates the opposite. |
networkSearchResult | Array<NetworkInformation> | Yes | Network search result. |
NetworkInformation
Defines the network information.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
operatorName | string | Yes | Carrier name. |
operatorNumeric | string | Yes | Carrier number. |
state | NetworkInformationState | Yes | Network information status. |
radioTech | string | Yes | Radio access technology. |
NetworkInformationState
Enumerates network information states.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Value | Description |
---|---|---|
NETWORK_UNKNOWN | 0 | Unknown state. |
NETWORK_AVAILABLE | 1 | Available for registration. |
NETWORK_CURRENT | 2 | Registered state. |
NETWORK_FORBIDDEN | 3 | Unavailable for registration. |
NetworkSelectionModeOptions
Defines the network selection mode.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
slotId | number | Yes | Card slot ID. - 0: card slot 1 - 1: card slot 2 |
selectMode | NetworkSelectionMode | Yes | Network selection mode. |
networkInformation | NetworkInformation | Yes | Network information. |
resumeSelection | boolean | Yes | Whether to resume selection. The value true means to resume selection, and the value false means the opposite. |
ImsRegState9+
Enumerates IMS registration states.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Value | Description |
---|---|---|
IMS_UNREGISTERED | 0 | Not registered. |
IMS_REGISTERED | 1 | Registered. |
ImsRegTech9+
Enumerates IMS registration technologies.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Value | Description |
---|---|---|
REGISTRATION_TECH_NONE | 0 | None. |
REGISTRATION_TECH_LTE | 1 | LTE. |
REGISTRATION_TECH_IWLAN | 2 | I-WLAN. |
REGISTRATION_TECH_NR | 3 | NR. |
ImsRegInfo9+
Defines the IMS registration information.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Type | Mandatory | Description |
---|---|---|---|
imsRegState | ImsRegState | Yes | IMS registration state. |
imsRegTech | ImsRegTech | Yes | IMS registration technology. |
ImsServiceType9+
Enumerates IMS service types.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Value | Description |
---|---|---|
TYPE_VOICE | 0 | Voice service. |
TYPE_VIDEO | 1 | Video service. |
TYPE_UT | 2 | UT service. |
TYPE_SMS | 3 | SMS service. |
NetworkCapabilityType10+
Enumerates network capability types.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Value | Description |
---|---|---|
SERVICE_TYPE_LTE | 0 | LTE service. |
SERVICE_TYPE_NR | 1 | NR service. |
NetworkCapabilityState10+
Defines the network capability switch status.
System API: This is a system API.
System capability: SystemCapability.Telephony.CoreService
Name | Value | Description |
---|---|---|
SERVICE_CAPABILITY_OFF | 0 | The network capability is disabled. |
SERVICE_CAPABILITY_ON | 1 | The network capability is enabled. |
你可能感兴趣的鸿蒙文章
harmony 鸿蒙Telephony_NetworkState
harmony 鸿蒙Telephony Error Codes
harmony 鸿蒙@ohos.telephony.call (Call)
harmony 鸿蒙@ohos.telephony.esim (eSIM Management) (System API)
harmony 鸿蒙@ohos.telephony.esim (eSIM Management)
harmony 鸿蒙@ohos.telephony.observer (Observer) (System API)
- 所属分类: 后端技术
- 本文标签:
热门推荐
-
2、 - 优质文章
-
3、 gate.io
-
8、 golang
-
9、 openharmony
-
10、 Vue中input框自动聚焦