kubernetes completion 源码

kubernetes completion 代码

文件路径：/cmd/kubeadm/app/cmd/completion.go

/*
Copyright 2017 The Kubernetes Authors.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/

package cmd

import (
	"bytes"
	"io"

	"github.com/lithammer/dedent"
	"github.com/pkg/errors"
	"github.com/spf13/cobra"

	"k8s.io/klog/v2"
)

const defaultBoilerPlate = `
# Copyright 2017 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
`

var (
	completionLong = dedent.Dedent(`
		Output shell completion code for the specified shell (bash or zsh).
		The shell code must be evaluated to provide interactive
		completion of kubeadm commands. This can be done by sourcing it from
		the .bash_profile.

		Note: this requires the bash-completion framework.

		To install it on Mac use homebrew:
		    $ brew install bash-completion
		Once installed, bash_completion must be evaluated. This can be done by adding the
		following line to the .bash_profile
		    $ source $(brew --prefix)/etc/bash_completion

		If bash-completion is not installed on Linux, please install the 'bash-completion' package
		via your distribution's package manager.

		Note for zsh users: [1] zsh completions are only supported in versions of zsh >= 5.2`)

	completionExample = dedent.Dedent(`
		# Install bash completion on a Mac using homebrew
		brew install bash-completion
		printf "\n# Bash completion support\nsource $(brew --prefix)/etc/bash_completion\n" >> $HOME/.bash_profile
		source $HOME/.bash_profile

		# Load the kubeadm completion code for bash into the current shell
		source <(kubeadm completion bash)

		# Write bash completion code to a file and source it from .bash_profile
		kubeadm completion bash > ~/.kube/kubeadm_completion.bash.inc
		printf "\n# Kubeadm shell completion\nsource '$HOME/.kube/kubeadm_completion.bash.inc'\n" >> $HOME/.bash_profile
		source $HOME/.bash_profile

		# Load the kubeadm completion code for zsh[1] into the current shell
		source <(kubeadm completion zsh)`)
)

var (
	completionShells = map[string]func(out io.Writer, cmd *cobra.Command) error{
		"bash": runCompletionBash,
		"zsh":  runCompletionZsh,
	}
)

// GetSupportedShells returns a list of supported shells
func GetSupportedShells() []string {
	shells := []string{}
	for s := range completionShells {
		shells = append(shells, s)
	}
	return shells
}

// newCmdCompletion returns the "kubeadm completion" command
func newCmdCompletion(out io.Writer, boilerPlate string) *cobra.Command {
	cmd := &cobra.Command{
		Use:     "completion SHELL",
		Short:   "Output shell completion code for the specified shell (bash or zsh)",
		Long:    completionLong,
		Example: completionExample,
		RunE: func(cmd *cobra.Command, args []string) error {
			return RunCompletion(out, boilerPlate, cmd, args)
		},
		ValidArgs: GetSupportedShells(),
	}

	return cmd
}

// RunCompletion checks given arguments and executes command
func RunCompletion(out io.Writer, boilerPlate string, cmd *cobra.Command, args []string) error {
	if length := len(args); length == 0 {
		return errors.New("shell not specified")
	} else if length > 1 {
		return errors.New("too many arguments. expected only the shell type")
	}
	run, found := completionShells[args[0]]
	if !found {
		return errors.Errorf("unsupported shell type %q", args[0])
	}

	if len(boilerPlate) == 0 {
		boilerPlate = defaultBoilerPlate
	}
	if _, err := out.Write([]byte(boilerPlate)); err != nil {
		return err
	}
	return run(out, cmd.Parent())
}

func runCompletionBash(out io.Writer, kubeadm *cobra.Command) error {
	klog.V(1).Infoln("[completion] writing completion code for Bash")
	return kubeadm.GenBashCompletion(out)
}

func runCompletionZsh(out io.Writer, kubeadm *cobra.Command) error {
	zshInitialization := `
__kubeadm_bash_source() {
	alias shopt=':'
	alias _expand=_bash_expand
	alias _complete=_bash_comp
	emulate -L sh
	setopt kshglob noshglob braceexpand

	source "$@"
}

__kubeadm_type() {
	# -t is not supported by zsh
	if [ "$1" == "-t" ]; then
		shift

		# fake Bash 4 to disable "complete -o nospace". Instead
		# "compopt +-o nospace" is used in the code to toggle trailing
		# spaces. We don't support that, but leave trailing spaces on
		# all the time
		if [ "$1" = "__kubeadm_compopt" ]; then
			echo builtin
			return 0
		fi
	fi
	type "$@"
}

__kubeadm_compgen() {
	local completions w
	completions=( $(compgen "$@") ) || return $?

	# filter by given word as prefix
	while [[ "$1" = -* && "$1" != -- ]]; do
		shift
		shift
	done
	if [[ "$1" == -- ]]; then
		shift
	fi
	for w in "${completions[@]}"; do
		if [[ "${w}" = "$1"* ]]; then
			echo "${w}"
		fi
	done
}

__kubeadm_compopt() {
	true # don't do anything. Not supported by bashcompinit in zsh
}

__kubeadm_ltrim_colon_completions()
{
	if [[ "$1" == *:* && "$COMP_WORDBREAKS" == *:* ]]; then
		# Remove colon-word prefix from COMPREPLY items
		local colon_word=${1%${1##*:}}
		local i=${#COMPREPLY[*]}
		while [[ $((--i)) -ge 0 ]]; do
			COMPREPLY[$i]=${COMPREPLY[$i]#"$colon_word"}
		done
	fi
}

__kubeadm_get_comp_words_by_ref() {
	cur="${COMP_WORDS[COMP_CWORD]}"
	prev="${COMP_WORDS[${COMP_CWORD}-1]}"
	words=("${COMP_WORDS[@]}")
	cword=("${COMP_CWORD[@]}")
}

__kubeadm_filedir() {
	local RET OLD_IFS w qw

	__kubectl_debug "_filedir $@ cur=$cur"
	if [[ "$1" = \~* ]]; then
		# somehow does not work. Maybe, zsh does not call this at all
		eval echo "$1"
		return 0
	fi

	OLD_IFS="$IFS"
	IFS=$'\n'
	if [ "$1" = "-d" ]; then
		shift
		RET=( $(compgen -d) )
	else
		RET=( $(compgen -f) )
	fi
	IFS="$OLD_IFS"

	IFS="," __kubectl_debug "RET=${RET[@]} len=${#RET[@]}"

	for w in ${RET[@]}; do
		if [[ ! "${w}" = "${cur}"* ]]; then
			continue
		fi
		if eval "[[ \"\${w}\" = *.$1 || -d \"\${w}\" ]]"; then
			qw="$(__kubeadm_quote "${w}")"
			if [ -d "${w}" ]; then
				COMPREPLY+=("${qw}/")
			else
				COMPREPLY+=("${qw}")
			fi
		fi
	done
}

__kubeadm_quote() {
    if [[ $1 == \'* || $1 == \"* ]]; then
        # Leave out first character
        printf %q "${1:1}"
    else
    	printf %q "$1"
    fi
}

autoload -U +X bashcompinit && bashcompinit

# use word boundary patterns for BSD or GNU sed
LWORD='[[:<:]]'
RWORD='[[:>:]]'
if sed --version 2>&1 | grep -q GNU; then
	LWORD='\<'
	RWORD='\>'
fi

__kubeadm_convert_bash_to_zsh() {
	sed \
	-e 's/declare -F/whence -w/' \
	-e 's/local \([a-zA-Z0-9_]*\)=/local \1; \1=/' \
	-e 's/flags+=("\(--.*\)=")/flags+=("\1"); two_word_flags+=("\1")/' \
	-e 's/must_have_one_flag+=("\(--.*\)=")/must_have_one_flag+=("\1")/' \
	-e "s/${LWORD}_filedir${RWORD}/__kubeadm_filedir/g" \
	-e "s/${LWORD}_get_comp_words_by_ref${RWORD}/__kubeadm_get_comp_words_by_ref/g" \
	-e "s/${LWORD}__ltrim_colon_completions${RWORD}/__kubeadm_ltrim_colon_completions/g" \
	-e "s/${LWORD}compgen${RWORD}/__kubeadm_compgen/g" \
	-e "s/${LWORD}compopt${RWORD}/__kubeadm_compopt/g" \
	-e "s/${LWORD}declare${RWORD}/builtin declare/g" \
	-e "s/\\\$(type${RWORD}/\$(__kubeadm_type/g" \
	<<'BASH_COMPLETION_EOF'
`
	klog.V(1).Infoln("[completion] writing completion code for Zsh")
	out.Write([]byte(zshInitialization))

	buf := new(bytes.Buffer)
	kubeadm.GenBashCompletion(buf)
	klog.V(1).Infoln("[completion] writing completion code for Bash")
	out.Write(buf.Bytes())

	zshTail := `
BASH_COMPLETION_EOF
}

__kubeadm_bash_source <(__kubeadm_convert_bash_to_zsh)
`
	out.Write([]byte(zshTail))
	return nil
}

相关信息

kubernetes 源码目录

相关文章

kubernetes certs 源码

kubernetes certs_test 源码

kubernetes cmd 源码

kubernetes completion_test 源码

kubernetes config 源码

kubernetes config_test 源码

kubernetes init 源码

kubernetes init_test 源码

kubernetes join 源码

kubernetes join_test 源码