harmony 鸿蒙LMS

  • 2022-08-09
  • 浏览 (749)

LMS

Basic Concepts

Lite Memory Sanitizer (LMS) is a tool used to detect memory errors on a real-time basis. It can detect buffer overflow, Use-After-Free (UAF), and double free errors in real time, and notify the operating system immediately. Together with Backtrace, the LMS can locate the code line that causes the memory error. It greatly improves the efficiency of locating memory errors.

The LMS module of the OpenHarmony LiteOS-M kernel provides the following functions:

  • Supports check of multiple memory pools.

  • Checks the memory allocated by LOS_MemAlloc, LOS_MemAllocAlign, and LOS_MemRealloc.

  • Checks the memory when bounds-checking functions are called (enabled by default).

  • Checks the memory when libc frequently accessed functions, including memset, memcpy, memmove, strcat, strcpy, strncat and strncpy, are called.

Working Principles

The LMS uses shadow memory mapping to mark the system memory state. There are three states: Accessible, RedZone, and Freed. The shadow memory is located in the tail of the memory pool.

  • After memory is allocated from the heap, the shadow memory in the data area is set to the Accessible state, and the shadow memory in the head node area is set to the RedZone state.

  • When memory is released from the heap, the shadow memory of the released memory is set to the Freed state.

  • During code compilation, a function is inserted before the read/write instructions in the code to check the address validity. The tool checks the state value of the shadow memory that accesses the memory. If the shadow memory is in the RedZone statue, an overflow error will be reported. If the shadow memory is in the Freed state, a UAF error will be reported.

  • When memory is released, the tool checks the state value of the shadow memory at the released address. If the shadow memory is in the RedZone state, a double free error will be reported.

Available APIs

The LMS module of the OpenHarmony LiteOS-A kernel provides the following APIs. For more details, see API reference.

Table 1 APIs of the LMS module

Category API Description
Adding a memory pool to be checked LOS_LmsCheckPoolAdd Adds the address range of a memory pool to the LMS check linked list. LMS performs a validity check when the accessed address is within the linked list. In addition, LOS_MemInit calls this API to add the initialized memory pool to the LMS check linked list by default.
Deleting a memory pool from the LMS check linked list LOS_LmsCheckPoolDel Cancels the validity check on the specified memory pool.
Protecting a specified memory chunk LOS_LmsAddrProtect Locks a memory chunk to prevent it from being read or written. Once the locked memory chunk is accessed, an error will be reported.
Disabling protection of a specified memory chunk LOS_LmsAddrDisableProtect Unlocks a memory chunk to make it readable and writable.

Development Guidelines

How to Develop

The typical process for enabling LMS is as follows:

  1. Configure the macros related to the LMS module. Configure the LMS macro LOSCFG_KERNEL_LMS, which is disabled by default.

Run the make menuconfig command in the kernel/liteos_m directory, and set Kernel->Enable Lite Memory Sanitizer to YES. If this option is unavailable, select Enable Backtrace.

|Macro|menuconfig Option|Description|Value| |——–|——–|——–|——–| |LOSCFG_KERNEL_LMS|Enable Lms Feature|Whether to enable LMS.|YES/NO| |LOSCFG_LMS_MAX_RECORD_POOL_NUM|Lms check pool max num|Maximum number of memory pools that can be checked by LMS.|INT| |LOSCFG_LMS_LOAD_CHECK|Enable lms read check|Whether to enable LMS read check.|YES/NO| |LOSCFG_LMS_STORE_CHECK|Enable lms write check|Whether to enable LMS write check.|YES/NO| |LOSCFG_LMS_CHECK_STRICT|Enable lms strict check, byte-by-byte|Whether to enable LMS byte-by-byte check.|YES/NO|

  1. Modify the build script of the target module. Add -fsanitize=kernel-address to insert memory access checks, and add -O0 to disable optimization performed by the compiler.

The modifications vary depending on the compiler (GCC or Clang) used. The following is an example:

   if ("$ohos_build_compiler_specified" == "gcc") {
       cflags_c = [
       "-O0",
       "-fsanitize=kernel-address",
       ]
   } else {
       cflags_c = [
       "-O0",
       "-fsanitize=kernel-address",
       "-mllvm",
       "-asan-instrumentation-with-call-threshold=0",
       "-mllvm",
       "-asan-stack=0",
       "-mllvm",
       "-asan-globals=0",
       ]
   }
  1. Recompile the code and check the serial port output.

The memory problem detected will be displayed.

Development Example

This example implements the following:

  1. Create a task for LMS.

  2. Construct a buffer overflow error and a UAF error.

  3. Add “-fsanitize=kernel-address”, execute the compilation, and check the output.

Sample Code

The code is as follows:

The sample code can be compiled and verified in ./kernel/liteos_m/testsuites/src/osTest.c. The Example_Lms_test function is called in TestTaskEntry.

Modify ./kernel/liteos_m/testsuites/BUILD.gn corresponding to osTest.c.

#define PAGE_SIZE       (0x1000U)
#define INDEX_MAX       20
UINT32 g_lmsTestTaskId;
char g_testLmsPool[2 * PAGE_SIZE];
STATIC VOID testPoolInit(void)
{
    UINT32 ret = LOS_MemInit(g_testLmsPool, 2 * PAGE_SIZE);
    if (ret != 0) {
        PRINT_ERR("%s failed, ret = 0x%x\n", __FUNCTION__, ret);
        return;
    }
}
static VOID LmsTestOsmallocOverflow(VOID)
{
    PRINTK("\n######%s start ######\n", __FUNCTION__);
    UINT32 i;
    CHAR *str = (CHAR *)LOS_MemAlloc(g_testLmsPool, INDEX_MAX);
    PRINTK("str[%2d]=0x%2x ", INDEX_MAX, str[INDEX_MAX]); /* trigger heap overflow at str[INDEX_MAX] */
    PRINTK("\n######%s stop ######\n", __FUNCTION__);
}
static VOID LmsTestUseAfterFree(VOID)
{
    PRINTK("\n######%s start ######\n", __FUNCTION__);
    UINT32 i;
    CHAR *str = (CHAR *)LOS_MemAlloc(g_testLmsPool, INDEX_MAX);
    LOS_MemFree(g_testLmsPool, str);
    PRINTK("str[%2d]=0x%2x ", 0, str[0]); /* trigger use after free at str[0] */
    PRINTK("\n######%s stop ######\n", __FUNCTION__);
}
VOID LmsTestCaseTask(VOID)
{ 
    testPoolInit();
    LmsTestOsmallocOverflow();
    LmsTestUseAfterFree();
}
UINT32 Example_Lms_test(VOID){
    UINT32 ret;    
    TSK_INIT_PARAM_S lmsTestTask;    
    /* Create a task for LMS. */   
    memset(&lmsTestTask, 0, sizeof(TSK_INIT_PARAM_S));    
    lmsTestTask.pfnTaskEntry = (TSK_ENTRY_FUNC)LmsTestCaseTask;
    lmsTestTask.pcName       = "TestLmsTsk";  /* Test task name. */   				     
    lmsTestTask.uwStackSize  = 0x800;    
    lmsTestTask.usTaskPrio   = 5;    
    lmsTestTask.uwResved   = LOS_TASK_STATUS_DETACHED;    
    ret = LOS_TaskCreate(&g_lmsTestTaskId, &lmsTestTask);    
    if(ret != LOS_OK){        
        PRINT_ERR("LmsTestTask create failed .\n");        
        return LOS_NOK;    
    } 
    return LOS_OK;
}

Verification

The following is an example of the command output. The data may vary depending on the running environment.

######LmsTestOsmallocOverflow start ######
[ERR][TestLmsTsk]*****  Kernel Address Sanitizer Error Detected Start *****
[ERR][TestLmsTsk]Heap buffer overflow error detected
[ERR][TestLmsTsk]Illegal READ address at: [0x21040414]
[ERR][TestLmsTsk]Shadow memory address: [0x21041e84 : 6]  Shadow memory value: [2]
psp, start = 21057d88, end = 21057e80
taskName = TestLmsTsk
taskID   = 5
----- traceback start -----
traceback 0 -- lr = 0x210099f4
traceback 1 -- lr = 0x2101da6e
traceback 2 -- lr = 0x2101db38
traceback 3 -- lr = 0x2101c494
----- traceback end -----

[LMS] Dump info around address [0x21040414]:

        [0x21040390]:  00  00  00  00  00  00  00  00|[0x21041e7c| 4]:  1  1
        [0x21040398]:  00  00  00  00  00  00  00  00|[0x21041e7d| 0]:  1  1
        [0x210403a0]:  00  00  00  00  00  00  00  00|[0x21041e7d| 4]:  1  1
        [0x210403a8]:  00  00  00  00  00  00  00  00|[0x21041e7e| 0]:  1  1
        [0x210403b0]:  00  00  00  00  00  00  00  00|[0x21041e7e| 4]:  1  1
        [0x210403b8]:  00  00  00  00  00  00  00  00|[0x21041e7f| 0]:  1  1
        [0x210403c0]:  00  00  00  00  00  00  00  00|[0x21041e7f| 4]:  1  1
        [0x210403c8]:  00  00  00  00  00  00  00  00|[0x21041e80| 0]:  1  1
        [0x210403d0]:  00  00  00  00  00  00  00  00|[0x21041e80| 4]:  1  1
        [0x210403d8]:  00  00  00  00  00  00  00  00|[0x21041e81| 0]:  1  1
        [0x210403e0]:  00  00  00  00  00  00  00  00|[0x21041e81| 4]:  1  1
        [0x210403e8]:  00  00  00  00  00  00  00  00|[0x21041e82| 0]:  1  1
        [0x210403f0]:  00  00  00  00  00  00  00  00|[0x21041e82| 4]:  1  1
        [0x210403f8]:  40  1e  04  21  05  07  00  80|[0x21041e83| 0]:  2  2
        [0x21040400]:  00  00  00  00  00  00  00  00|[0x21041e83| 4]:  0  0
        [0x21040408]:  00  00  00  00  00  00  00  00|[0x21041e84| 0]:  0  0
        [0x21040410]:  00  00  00  00 [f8] 03  04  21|[0x21041e84| 4]:  0 [2]
        [0x21040418]:  00  8b  06  00  00  00  00  00|[0x21041e85| 0]:  2  3
        [0x21040420]:  00  00  00  00  00  00  00  00|[0x21041e85| 4]:  3  3
        [0x21040428]:  00  00  00  00  00  00  00  00|[0x21041e86| 0]:  3  3
        [0x21040430]:  00  00  00  00  00  00  00  00|[0x21041e86| 4]:  3  3
        [0x21040438]:  00  00  00  00  00  00  00  00|[0x21041e87| 0]:  3  3
        [0x21040440]:  00  00  00  00  00  00  00  00|[0x21041e87| 4]:  3  3
        [0x21040448]:  00  00  00  00  00  00  00  00|[0x21041e88| 0]:  3  3
        [0x21040450]:  00  00  00  00  00  00  00  00|[0x21041e88| 4]:  3  3
        [0x21040458]:  00  00  00  00  00  00  00  00|[0x21041e89| 0]:  3  3
        [0x21040460]:  00  00  00  00  00  00  00  00|[0x21041e89| 4]:  3  3
        [0x21040468]:  00  00  00  00  00  00  00  00|[0x21041e8a| 0]:  3  3
        [0x21040470]:  00  00  00  00  00  00  00  00|[0x21041e8a| 4]:  3  3
        [0x21040478]:  00  00  00  00  00  00  00  00|[0x21041e8b| 0]:  3  3
        [0x21040480]:  00  00  00  00  00  00  00  00|[0x21041e8b| 4]:  3  3
        [0x21040488]:  00  00  00  00  00  00  00  00|[0x21041e8c| 0]:  3  3
        [0x21040490]:  00  00  00  00  00  00  00  00|[0x21041e8c| 4]:  3  3
[ERR][TestLmsTsk]*****  Kernel Address Sanitizer Error Detected End *****
str[20]=0xfffffff8
######LmsTestOsmallocOverflow stop ######

######LmsTestUseAfterFree start ######
[ERR][TestLmsTsk]*****  Kernel Address Sanitizer Error Detected Start *****
[ERR][TestLmsTsk]Use after free error detected
[ERR][TestLmsTsk]Illegal READ address at: [0x2104041c]
[ERR][TestLmsTsk]Shadow memory address: [0x21041e85 : 2]  Shadow memory value: [3]
psp, start = 21057d90, end = 21057e80
taskName = TestLmsTsk
taskID   = 5
----- traceback start -----
traceback 0 -- lr = 0x210099f4
traceback 1 -- lr = 0x2101daec
traceback 2 -- lr = 0x2101db3c
traceback 3 -- lr = 0x2101c494
----- traceback end -----

[LMS] Dump info around address [0x2104041c]:

        [0x21040398]:  00  00  00  00  00  00  00  00|[0x21041e7d| 0]:  1  1
        [0x210403a0]:  00  00  00  00  00  00  00  00|[0x21041e7d| 4]:  1  1
        [0x210403a8]:  00  00  00  00  00  00  00  00|[0x21041e7e| 0]:  1  1
        [0x210403b0]:  00  00  00  00  00  00  00  00|[0x21041e7e| 4]:  1  1
        [0x210403b8]:  00  00  00  00  00  00  00  00|[0x21041e7f| 0]:  1  1
        [0x210403c0]:  00  00  00  00  00  00  00  00|[0x21041e7f| 4]:  1  1
        [0x210403c8]:  00  00  00  00  00  00  00  00|[0x21041e80| 0]:  1  1
        [0x210403d0]:  00  00  00  00  00  00  00  00|[0x21041e80| 4]:  1  1
        [0x210403d8]:  00  00  00  00  00  00  00  00|[0x21041e81| 0]:  1  1
        [0x210403e0]:  00  00  00  00  00  00  00  00|[0x21041e81| 4]:  1  1
        [0x210403e8]:  00  00  00  00  00  00  00  00|[0x21041e82| 0]:  1  1
        [0x210403f0]:  00  00  00  00  00  00  00  00|[0x21041e82| 4]:  1  1
        [0x210403f8]:  40  1e  04  21  05  07  00  80|[0x21041e83| 0]:  2  2
        [0x21040400]:  00  00  00  00  00  00  00  00|[0x21041e83| 4]:  0  0
        [0x21040408]:  00  00  00  00  00  00  00  00|[0x21041e84| 0]:  0  0
        [0x21040410]:  00  00  00  00  f8  03  04  21|[0x21041e84| 4]:  0  2
        [0x21040418]:  05  8b  06  00 [00] 00  00  00|[0x21041e85| 0]:  2 [3]
        [0x21040420]:  00  00  00  00  00  00  00  00|[0x21041e85| 4]:  3  3
        [0x21040428]:  00  00  00  00  00  00  00  00|[0x21041e86| 0]:  3  3
        [0x21040430]:  14  04  04  21  00  84  06  00|[0x21041e86| 4]:  2  2
        [0x21040438]:  00  00  00  00  00  00  00  00|[0x21041e87| 0]:  3  3
        [0x21040440]:  00  00  00  00  00  00  00  00|[0x21041e87| 4]:  3  3
        [0x21040448]:  00  00  00  00  00  00  00  00|[0x21041e88| 0]:  3  3
        [0x21040450]:  00  00  00  00  00  00  00  00|[0x21041e88| 4]:  3  3
        [0x21040458]:  00  00  00  00  00  00  00  00|[0x21041e89| 0]:  3  3
        [0x21040460]:  00  00  00  00  00  00  00  00|[0x21041e89| 4]:  3  3
        [0x21040468]:  00  00  00  00  00  00  00  00|[0x21041e8a| 0]:  3  3
        [0x21040470]:  00  00  00  00  00  00  00  00|[0x21041e8a| 4]:  3  3
        [0x21040478]:  00  00  00  00  00  00  00  00|[0x21041e8b| 0]:  3  3
        [0x21040480]:  00  00  00  00  00  00  00  00|[0x21041e8b| 4]:  3  3
        [0x21040488]:  00  00  00  00  00  00  00  00|[0x21041e8c| 0]:  3  3
        [0x21040490]:  00  00  00  00  00  00  00  00|[0x21041e8c| 4]:  3  3
        [0x21040498]:  00  00  00  00  00  00  00  00|[0x21041e8d| 0]:  3  3
[ERR][TestLmsTsk]*****  Kernel Address Sanitizer Error Detected End *****
str[ 0]=0x 0
######LmsTestUseAfterFree stop ######

The key output information is as follows:

  • Error type:

    • Heap buffer overflow
    • UAF

  • Incorrect operations:

    • Illegal read
    • Illegal write
    • Illegal double free

  • Context:

    • Task information (taskName and taskId)
    • Backtrace

  • Memory information of the error addresses:

    • Memory value and the value of the corresponding shadow memory
    • Memory address: memory value|[shadow memory address|shadow memory byte offset]: shadow memory value
    • Shadow memory value. 0 (Accessible), 3 (Freed), 2 (RedZone), and 1 (filled value)

你可能感兴趣的鸿蒙文章

harmony 鸿蒙Kernel

harmony 鸿蒙Kernel Coding Specification

harmony 鸿蒙Standard Libraries

harmony 鸿蒙Interrupt Management

harmony 鸿蒙Event

harmony 鸿蒙Mutex

harmony 鸿蒙Queue

harmony 鸿蒙Semaphore

harmony 鸿蒙Doubly Linked List

harmony 鸿蒙Memory Management

0  赞
  • 所属分类： 后端技术
  • 本文标签：
  • 版权声明： 原创文章如转载，请注明本文链接: https://m.seaxiang.com/blog/8cc5dce7b8414f6da76296f8523d446c
热门推荐
标签云
Linux Java Spring Spring Boot docker 大数据 前端 生活 maven golang 软件 spring cloud fintech mac vscode 其他 区块链 以太坊 V神 开发者 技术 股票 git greenplum 分布式事务 chrome mysql flink kafka 设计模式 原理 鸿蒙 seo
最新文章
本文目录