harmony 鸿蒙@ohos.hiTraceChain (Distributed Tracing)

2022-08-09
浏览 (763)

@ohos.hiTraceChain (Distributed Tracing)

The hiTraceChain module implements call chain tracing throughout a service process. It provides functions such as starting and stopping call chain tracing and configuring trace points.

NOTE

The initial APIs of this module are supported since API version 8. Newly added APIs will be marked with a superscript to indicate their earliest API version.

Modules to Import

import hiTraceChain from '@ohos.hiTraceChain';

HiTraceFlag

Enumerates trace flag types.

System capability: SystemCapability.HiviewDFX.HiTrace

Name	Value	Description
DEFAULT	0	Default flag.
INCLUDE_ASYNC	1	Asynchronous call flag. By default, only synchronous calls are traced. If this flag is set, both synchronous and asynchronous calls will be traced.
DONOT_CREATE_SPAN	1 << 1	No span flag. By default, spans are created within a trace of synchronous and asynchronous service calls. If this flag is set, no spans are created.
TP_INFO	1 << 2	Trace point flag. By default, no trace point is added when trace is enabled. This flag is used for debugging. If this flag is set, trace points will be automatically added on the TX and RX sides of synchronous and asynchronous calls to output trace point and timestamp information. Trace points are classified into four types: CS, SR, SS, and CR. For a synchronous call, the output trace points are CS, SR, SS, and CR; for an asynchronous call, the output trace points are CS, SR, and SS.
NO_BE_INFO	1 << 3	No begin/end flag. By default, information about the start and end of the trace task is printed. If this flag is set, information about the start and end of the trace task will not be printed.
DISABLE_LOG	1 << 4	Log association flag. If this flag is set, information about the trace task will not be printed.
FAILURE_TRIGGER	1 << 5	Failure trigger flag. This flag is reserved for future use.
D2D_TP_INFO	1 << 6	Device-to-device trace point flag. It is a subset of TP_INFO. If this flag is set, trace points are added only for call chain trace between devices.

HiTraceTracepointType

Enumerates trace point types.

System capability: SystemCapability.HiviewDFX.HiTrace

Name	Value	Description
CS	0	CS trace point.
CR	1	CR trace point.
SS	2	SS trace point.
SR	3	SR trace point.
GENERAL	4	General trace points except CS, CR, SS, and SR.

HiTraceCommunicationMode

Enumerates communication modes.

System capability: SystemCapability.HiviewDFX.HiTrace

Name	Value	Description
DEFAULT	0	Default communication mode.
THREAD	1	Inter-thread communication.
PROCESS	2	Inter-process communication.
DEVICE	3	Inter-device communication.

HiTraceId

Defines a HiTraceId object.

System capability: SystemCapability.HiviewDFX.HiTrace

Name	Type	Mandatory	Description
chainId	bigint	Yes	Call chain ID.
spanId	number	No	Span ID.
parentSpanId	number	No	Parent span ID.
flags	number	No	Trace flag combination.

hiTraceChain.begin

begin(name: string, flags?: number): HiTraceId

Starts call chain tracing. This API returns the result synchronously.

System capability: SystemCapability.HiviewDFX.HiTrace

Parameters

Name	Type	Mandatory	Description
name	string	Yes	Traced service name.
flags	number	No	Trace flag combination. For details, see HiTraceFlag.

Return value

Type	Description
HiTraceId	HiTraceId instance.

Example

let asyncTraceId = hiTraceChain.begin("business", hiTraceChain.HiTraceFlag.INCLUDE_ASYNC|hiTraceChain.HiTraceFlag.DONOT_CREATE_SPAN);

hiTraceChain.end

end(id: HiTraceId): void

Stops call chain tracing. This API works in synchronous manner.

System capability: SystemCapability.HiviewDFX.HiTrace

Parameters

Name	Type	Mandatory	Description
id	HiTraceId	Yes	HiTraceId instance.

Example

let asyncTraceId = hiTraceChain.begin("business", hiTraceChain.HiTraceFlag.DEFAULT);
// End the call chain tracing after the service logic is executed for several times.
hiTraceChain.end(asyncTraceId);

hiTraceChain.getId

getId(): HiTraceId

Obtains the trace ID. This API returns the result synchronously.

System capability: SystemCapability.HiviewDFX.HiTrace

Return value

Type	Description
HiTraceId	HiTraceId instance.

Example

let traceId = hiTraceChain.begin("business", hiTraceChain.HiTraceFlag.DEFAULT);
// Obtain the current trace ID after the service logic is executed for several times.
let curTraceId = hiTraceChain.getId();

hiTraceChain.setId

setId(id: HiTraceId): void

Sets a trace ID. This API returns the result synchronously.

System capability: SystemCapability.HiviewDFX.HiTrace

Parameters

Name	Type	Mandatory	Description
id	HiTraceId	Yes	HiTraceId instance.

Example

let asyncTraceId: hiTraceChain.HiTraceId;
hiTraceChain.end(asyncTraceId);
let traceId = hiTraceChain.begin("business", hiTraceChain.HiTraceFlag.DEFAULT);
// Set the previous trace ID to the current trace ID after the service logic is executed for several times.
hiTraceChain.setId(asyncTraceId);

hiTraceChain.clearId

clearId(): void

Clears the trace ID. This API returns the result synchronously.

System capability: SystemCapability.HiviewDFX.HiTrace

Example

let traceId = hiTraceChain.begin("business", hiTraceChain.HiTraceFlag.DEFAULT);
// Clear the current trace ID after the service logic is executed for several times.
hiTraceChain.clearId();

hiTraceChain.createSpan

createSpan(): HiTraceId

Creates a trace span. This API works in synchronous manner.

System capability: SystemCapability.HiviewDFX.HiTrace

Return value

Type	Description
HiTraceId	HiTraceId instance.

Example

let traceId = hiTraceChain.begin("business", hiTraceChain.HiTraceFlag.DEFAULT);
// Create a trace span after the service logic is executed for several times.
let spanTraceId = hiTraceChain.createSpan();

hiTraceChain.tracepoint

tracepoint(mode: HiTraceCommunicationMode, type: HiTraceTracepointType, id: HiTraceId, msg?: string): void

Triggers a trace point. This API returns the result synchronously.

System capability: SystemCapability.HiviewDFX.HiTrace

Parameters

Name	Type	Mandatory	Description
mode	HiTraceCommunicationMode	Yes	Communication mode for the trace point.
type	HiTraceTracepointType	Yes	Trace point type.
id	HiTraceId	Yes	HiTraceId instance for trace point triggering.
msg	string	No	Trace description passed for trace point triggering.

Example

let asyncTraceId = hiTraceChain.begin("business", hiTraceChain.HiTraceFlag.INCLUDE_ASYNC|hiTraceChain.HiTraceFlag.DONOT_CREATE_SPAN);
// Trigger the trace point after the service logic is executed for several times.
hiTraceChain.tracepoint(hiTraceChain.HiTraceCommunicationMode.THREAD, hiTraceChain.HiTraceTracepointType.SS, asyncTraceId, "Just a example");

hiTraceChain.isValid

isValid(id: HiTraceId): boolean

Checks whether a HiTraceId instance is valid. This API returns the result synchronously.

System capability: SystemCapability.HiviewDFX.HiTrace

Parameters

Name	Type	Mandatory	Description
id	HiTraceId	Yes	HiTraceId instance.

Return value

Type	Description
boolean	Boolean value indicating whether the HiTraceId instance is valid. The value true means yes and the value false means no.

Example

let traceId = hiTraceChain.begin("business", hiTraceChain.HiTraceFlag.DEFAULT);
let traceIdIsvalid = hiTraceChain.isValid(traceId);

hiTraceChain.isFlagEnabled

isFlagEnabled(id: HiTraceId, flag: HiTraceFlag): boolean

Checks whether the specified trace flag in the HiTraceId instance is enabled. This API returns the result synchronously.

System capability: SystemCapability.HiviewDFX.HiTrace

Parameters

Name	Type	Mandatory	Description
id	HiTraceId	Yes	HiTraceId instance.
flag	HiTraceFlag	Yes	Specified trace flag.

Return value

Type	Description
boolean	Boolean value indicating whether the specified trace flag in the HiTraceId instance is enabled. The value true means yes and the value false means no.

Example

let asyncTraceId = hiTraceChain.begin("business", hiTraceChain.HiTraceFlag.INCLUDE_ASYNC);
// The value of enabledDoNotCreateSpanFlag is true.
let enabledDoNotCreateSpanFlag = hiTraceChain.isFlagEnabled(asyncTraceId, hiTraceChain.HiTraceFlag.INCLUDE_ASYNC);

hiTraceChain.enableFlag

enableFlag(id: HiTraceId, flag: HiTraceFlag): void

Enables the specified trace flag in the HiTraceId instance. This API returns the result synchronously.

System capability: SystemCapability.HiviewDFX.HiTrace

Parameters

Name	Type	Mandatory	Description
id	HiTraceId	Yes	HiTraceId instance.
flag	HiTraceFlag	Yes	Specified trace flag.

Example

let asyncTraceId = hiTraceChain.begin("business", hiTraceChain.HiTraceFlag.INCLUDE_ASYNC);
hiTraceChain.enableFlag(asyncTraceId, hiTraceChain.HiTraceFlag.DONOT_CREATE_SPAN);
// The value of enabledDoNotCreateSpanFlag is true.
let enabledDoNotCreateSpanFlag = hiTraceChain.isFlagEnabled(asyncTraceId, hiTraceChain.HiTraceFlag.DONOT_CREATE_SPAN);