tidb selectivity 源码
tidb selectivity 代码
文件路径：/statistics/selectivity.go
// Copyright 2017 PingCAP, Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package statistics
import (
"bytes"
"math"
"math/bits"
"github.com/pingcap/errors"
"github.com/pingcap/tidb/expression"
"github.com/pingcap/tidb/parser/ast"
"github.com/pingcap/tidb/parser/format"
"github.com/pingcap/tidb/parser/mysql"
planutil "github.com/pingcap/tidb/planner/util"
"github.com/pingcap/tidb/sessionctx"
"github.com/pingcap/tidb/types"
driver "github.com/pingcap/tidb/types/parser_driver"
"github.com/pingcap/tidb/util/chunk"
"github.com/pingcap/tidb/util/logutil"
"github.com/pingcap/tidb/util/ranger"
"github.com/pingcap/tidb/util/tracing"
"go.uber.org/zap"
"golang.org/x/exp/slices"
)
// If one condition can't be calculated, we will assume that the selectivity of this condition is 0.8.
const selectionFactor = 0.8
// StatsNode is used for calculating selectivity.
type StatsNode struct {
Tp int
ID int64
// mask is a bit pattern whose ith bit will indicate whether the ith expression is covered by this index/column.
mask int64
// Ranges contains all the Ranges we got.
Ranges []*ranger.Range
// Selectivity indicates the Selectivity of this column/index.
Selectivity float64
// numCols is the number of columns contained in the index or column(which is always 1).
numCols int
// partCover indicates whether the bit in the mask is for a full cover or partial cover. It is only true
// when the condition is a DNF expression on index, and the expression is not totally extracted as access condition.
partCover bool
}
// The type of the StatsNode.
const (
IndexType = iota
PkType
ColType
)
func compareType(l, r int) int {
if l == r {
return 0
}
if l == ColType {
return -1
}
if l == PkType {
return 1
}
if r == ColType {
return 1
}
return -1
}
// MockStatsNode is only used for test.
func MockStatsNode(id int64, m int64, num int) *StatsNode {
return &StatsNode{ID: id, mask: m, numCols: num}
}
const unknownColumnID = math.MinInt64
// getConstantColumnID receives two expressions and if one of them is column and another is constant, it returns the
// ID of the column.
func getConstantColumnID(e []expression.Expression) int64 {
if len(e) != 2 {
return unknownColumnID
}
col, ok1 := e[0].(*expression.Column)
_, ok2 := e[1].(*expression.Constant)
if ok1 && ok2 {
return col.ID
}
col, ok1 = e[1].(*expression.Column)
_, ok2 = e[0].(*expression.Constant)
if ok1 && ok2 {
return col.ID
}
return unknownColumnID
}
func pseudoSelectivity(coll *HistColl, exprs []expression.Expression) float64 {
minFactor := selectionFactor
colExists := make(map[string]bool)
for _, expr := range exprs {
fun, ok := expr.(*expression.ScalarFunction)
if !ok {
continue
}
colID := getConstantColumnID(fun.GetArgs())
if colID == unknownColumnID {
continue
}
switch fun.FuncName.L {
case ast.EQ, ast.NullEQ, ast.In:
minFactor = math.Min(minFactor, 1.0/pseudoEqualRate)
col, ok := coll.Columns[colID]
if !ok {
continue
}
colExists[col.Info.Name.L] = true
if mysql.HasUniKeyFlag(col.Info.GetFlag()) {
return 1.0 / float64(coll.Count)
}
case ast.GE, ast.GT, ast.LE, ast.LT:
minFactor = math.Min(minFactor, 1.0/pseudoLessRate)
// FIXME: To resolve the between case.
}
}
if len(colExists) == 0 {
return minFactor
}
// use the unique key info
for _, idx := range coll.Indices {
if !idx.Info.Unique {
continue
}
unique := true
for _, col := range idx.Info.Columns {
if !colExists[col.Name.L] {
unique = false
break
}
}
if unique {
return 1.0 / float64(coll.Count)
}
}
return minFactor
}
// isColEqCorCol checks if the expression is a eq function that one side is correlated column and another is column.
// If so, it will return the column's reference. Otherwise return nil instead.
func isColEqCorCol(filter expression.Expression) *expression.Column {
f, ok := filter.(*expression.ScalarFunction)
if !ok || f.FuncName.L != ast.EQ {
return nil
}
if c, ok := f.GetArgs()[0].(*expression.Column); ok {
if _, ok := f.GetArgs()[1].(*expression.CorrelatedColumn); ok {
return c
}
}
if c, ok := f.GetArgs()[1].(*expression.Column); ok {
if _, ok := f.GetArgs()[0].(*expression.CorrelatedColumn); ok {
return c
}
}
return nil
}
// Selectivity is a function calculate the selectivity of the expressions.
// The definition of selectivity is (row count after filter / row count before filter).
// And exprs must be CNF now, in other words, `exprs[0] and exprs[1] and ... and exprs[len - 1]` should be held when you call this.
// Currently the time complexity is o(n^2).
func (coll *HistColl) Selectivity(ctx sessionctx.Context, exprs []expression.Expression, filledPaths []*planutil.AccessPath) (float64, []*StatsNode, error) {
// If table's count is zero or conditions are empty, we should return 100% selectivity.
if coll.Count == 0 || len(exprs) == 0 {
return 1, nil, nil
}
ret := 1.0
sc := ctx.GetSessionVars().StmtCtx
tableID := coll.PhysicalID
// TODO: If len(exprs) is bigger than 63, we could use bitset structure to replace the int64.
// This will simplify some code and speed up if we use this rather than a boolean slice.
if len(exprs) > 63 || (len(coll.Columns) == 0 && len(coll.Indices) == 0) {
ret = pseudoSelectivity(coll, exprs)
if sc.EnableOptimizerCETrace {
CETraceExpr(ctx, tableID, "Table Stats-Pseudo-Expression", expression.ComposeCNFCondition(ctx, exprs...), ret*float64(coll.Count))
}
return ret, nil, nil
}
var nodes []*StatsNode
remainedExprs := make([]expression.Expression, 0, len(exprs))
// Deal with the correlated column.
for _, expr := range exprs {
c := isColEqCorCol(expr)
if c == nil {
remainedExprs = append(remainedExprs, expr)
continue
}
colHist := coll.Columns[c.UniqueID]
if colHist == nil || colHist.IsInvalid(ctx, coll.Pseudo) {
ret *= 1.0 / pseudoEqualRate
continue
}
if colHist.Histogram.NDV > 0 {
ret *= 1 / float64(colHist.Histogram.NDV)
} else {
ret *= 1.0 / pseudoEqualRate
}
}
extractedCols := make([]*expression.Column, 0, len(coll.Columns))
extractedCols = expression.ExtractColumnsFromExpressions(extractedCols, remainedExprs, nil)
for id, colInfo := range coll.Columns {
col := expression.ColInfo2Col(extractedCols, colInfo.Info)
if col != nil {
maskCovered, ranges, _, err := getMaskAndRanges(ctx, remainedExprs, ranger.ColumnRangeType, nil, nil, col)
if err != nil {
return 0, nil, errors.Trace(err)
}
nodes = append(nodes, &StatsNode{Tp: ColType, ID: id, mask: maskCovered, Ranges: ranges, numCols: 1})
if colInfo.IsHandle {
nodes[len(nodes)-1].Tp = PkType
var cnt float64
cnt, err = coll.GetRowCountByIntColumnRanges(ctx, id, ranges)
if err != nil {
return 0, nil, errors.Trace(err)
}
nodes[len(nodes)-1].Selectivity = cnt / float64(coll.Count)
continue
}
cnt, err := coll.GetRowCountByColumnRanges(ctx, id, ranges)
if err != nil {
return 0, nil, errors.Trace(err)
}
nodes[len(nodes)-1].Selectivity = cnt / float64(coll.Count)
}
}
id2Paths := make(map[int64]*planutil.AccessPath)
for _, path := range filledPaths {
// Index merge path and table path don't have index.
if path.Index == nil {
continue
}
id2Paths[path.Index.ID] = path
}
for id, idxInfo := range coll.Indices {
idxCols := FindPrefixOfIndexByCol(extractedCols, coll.Idx2ColumnIDs[id], id2Paths[idxInfo.ID])
if len(idxCols) > 0 {
lengths := make([]int, 0, len(idxCols))
for i := 0; i < len(idxCols) && i < len(idxInfo.Info.Columns); i++ {
lengths = append(lengths, idxInfo.Info.Columns[i].Length)
}
// If the found columns are more than the columns held by the index. We are appending the int pk to the tail of it.
// When storing index data to key-value store, we use (idx_col1, ...., idx_coln, handle_col) as its key.
if len(idxCols) > len(idxInfo.Info.Columns) {
lengths = append(lengths, types.UnspecifiedLength)
}
maskCovered, ranges, partCover, err := getMaskAndRanges(ctx, remainedExprs, ranger.IndexRangeType, lengths, id2Paths[idxInfo.ID], idxCols...)
if err != nil {
return 0, nil, errors.Trace(err)
}
cnt, err := coll.GetRowCountByIndexRanges(ctx, id, ranges)
if err != nil {
return 0, nil, errors.Trace(err)
}
selectivity := cnt / float64(coll.Count)
nodes = append(nodes, &StatsNode{
Tp: IndexType,
ID: id,
mask: maskCovered,
Ranges: ranges,
numCols: len(idxInfo.Info.Columns),
Selectivity: selectivity,
partCover: partCover,
})
}
}
usedSets := GetUsableSetsByGreedy(nodes)
// Initialize the mask with the full set.
mask := (int64(1) << uint(len(remainedExprs))) - 1
// curExpr records covered expressions by now. It's for cardinality estimation tracing.
var curExpr []expression.Expression
for _, set := range usedSets {
mask &^= set.mask
ret *= set.Selectivity
// If `partCover` is true, it means that the conditions are in DNF form, and only part
// of the DNF expressions are extracted as access conditions, so besides from the selectivity
// of the extracted access conditions, we multiply another selectionFactor for the residual
// conditions.
if set.partCover {
ret *= selectionFactor
}
if sc.EnableOptimizerCETrace {
// Tracing for the expression estimation results after applying this StatsNode.
for i := range remainedExprs {
if set.mask&(1<<uint64(i)) > 0 {
curExpr = append(curExpr, remainedExprs[i])
}
}
expr := expression.ComposeCNFCondition(ctx, curExpr...)
CETraceExpr(ctx, tableID, "Table Stats-Expression-CNF", expr, ret*float64(coll.Count))
}
}
notCoveredConstants := make(map[int]*expression.Constant)
notCoveredDNF := make(map[int]*expression.ScalarFunction)
notCoveredStrMatch := make(map[int]*expression.ScalarFunction)
notCoveredNegateStrMatch := make(map[int]*expression.ScalarFunction)
notCoveredOtherExpr := make(map[int]expression.Expression)
if mask > 0 {
for i, expr := range remainedExprs {
if mask&(1<<uint64(i)) == 0 {
continue
}
switch x := expr.(type) {
case *expression.Constant:
notCoveredConstants[i] = x
continue
case *expression.ScalarFunction:
switch x.FuncName.L {
case ast.LogicOr:
notCoveredDNF[i] = x
continue
case ast.Like, ast.Regexp, ast.RegexpLike:
notCoveredStrMatch[i] = x
continue
case ast.UnaryNot:
inner := expression.GetExprInsideIsTruth(x.GetArgs()[0])
innerSF, ok := inner.(*expression.ScalarFunction)
if ok {
switch innerSF.FuncName.L {
case ast.Like, ast.Regexp, ast.RegexpLike:
notCoveredNegateStrMatch[i] = x
continue
}
}
}
}
notCoveredOtherExpr[i] = expr
}
}
// Try to cover remaining Constants
for i, c := range notCoveredConstants {
if expression.MaybeOverOptimized4PlanCache(ctx, []expression.Expression{c}) {
continue
}
if c.Value.IsNull() {
// c is null
ret *= 0
mask &^= 1 << uint64(i)
delete(notCoveredConstants, i)
} else if isTrue, err := c.Value.ToBool(sc); err == nil {
if isTrue == 0 {
// c is false
ret *= 0
}
// c is true, no need to change ret
mask &^= 1 << uint64(i)
delete(notCoveredConstants, i)
}
// Not expected to come here:
// err != nil, no need to do anything.
}
// Try to cover remaining DNF conditions using independence assumption,
// i.e., sel(condA or condB) = sel(condA) + sel(condB) - sel(condA) * sel(condB)
OUTER:
for i, scalarCond := range notCoveredDNF {
// If there are columns not in stats, we won't handle them. This case might happen after DDL operations.
cols := expression.ExtractColumns(scalarCond)
for i := range cols {
if _, ok := coll.Columns[cols[i].UniqueID]; !ok {
continue OUTER
}
}
dnfItems := expression.FlattenDNFConditions(scalarCond)
dnfItems = ranger.MergeDNFItems4Col(ctx, dnfItems)
// If the conditions only contain a single column, we won't handle them.
if len(dnfItems) <= 1 {
continue
}
selectivity := 0.0
for _, cond := range dnfItems {
// In selectivity calculation, we don't handle CorrelatedColumn, so we directly skip over it.
// Other kinds of `Expression`, i.e., Constant, Column and ScalarFunction all can possibly be built into
// ranges and used to calculation selectivity, so we accept them all.
_, ok := cond.(*expression.CorrelatedColumn)
if ok {
continue
}
var cnfItems []expression.Expression
if scalar, ok := cond.(*expression.ScalarFunction); ok && scalar.FuncName.L == ast.LogicAnd {
cnfItems = expression.FlattenCNFConditions(scalar)
} else {
cnfItems = append(cnfItems, cond)
}
curSelectivity, _, err := coll.Selectivity(ctx, cnfItems, nil)
if err != nil {
logutil.BgLogger().Debug("something wrong happened, use the default selectivity", zap.Error(err))
curSelectivity = selectionFactor
}
selectivity = selectivity + curSelectivity - selectivity*curSelectivity
if sc.EnableOptimizerCETrace {
// Tracing for the expression estimation results of this DNF.
CETraceExpr(ctx, tableID, "Table Stats-Expression-DNF", scalarCond, selectivity*float64(coll.Count))
}
}
if selectivity != 0 {
ret *= selectivity
mask &^= 1 << uint64(i)
delete(notCoveredDNF, i)
}
if sc.EnableOptimizerCETrace {
// Tracing for the expression estimation results after applying the DNF estimation result.
curExpr = append(curExpr, remainedExprs[i])
expr := expression.ComposeCNFCondition(ctx, curExpr...)
CETraceExpr(ctx, tableID, "Table Stats-Expression-CNF", expr, ret*float64(coll.Count))
}
}
// Try to cover remaining string matching functions by evaluating the expressions with TopN to estimate.
if ctx.GetSessionVars().EnableEvalTopNEstimationForStrMatch() {
for i, scalarCond := range notCoveredStrMatch {
ok, sel, err := coll.GetSelectivityByFilter(ctx, ctx.GetSessionVars().GetStrMatchDefaultSelectivity(), []expression.Expression{scalarCond})
if err != nil {
sc.AppendWarning(errors.New("Error when using TopN-assisted estimation: " + err.Error()))
}
if !ok {
continue
}
ret *= sel
mask &^= 1 << uint64(i)
delete(notCoveredStrMatch, i)
}
for i, scalarCond := range notCoveredNegateStrMatch {
ok, sel, err := coll.GetSelectivityByFilter(ctx, ctx.GetSessionVars().GetNegateStrMatchDefaultSelectivity(), []expression.Expression{scalarCond})
if err != nil {
sc.AppendWarning(errors.New("Error when using TopN-assisted estimation: " + err.Error()))
}
if !ok {
continue
}
ret *= sel
mask &^= 1 << uint64(i)
delete(notCoveredNegateStrMatch, i)
}
}
// At last, if there are still conditions which cannot be estimated, we multiply the selectivity with
// the minimal default selectivity of the remaining conditions.
// Currently, only string matching functions (like and regexp) may have a different default selectivity,
// other expressions' default selectivity is selectionFactor.
if mask > 0 {
minSelectivity := 1.0
if len(notCoveredConstants) > 0 || len(notCoveredDNF) > 0 || len(notCoveredOtherExpr) > 0 {
minSelectivity = math.Min(minSelectivity, selectionFactor)
}
if len(notCoveredStrMatch) > 0 {
minSelectivity = math.Min(minSelectivity, ctx.GetSessionVars().GetStrMatchDefaultSelectivity())
}
if len(notCoveredNegateStrMatch) > 0 {
minSelectivity = math.Min(minSelectivity, ctx.GetSessionVars().GetNegateStrMatchDefaultSelectivity())
}
ret *= minSelectivity
}
if sc.EnableOptimizerCETrace {
// Tracing for the expression estimation results after applying the default selectivity.
totalExpr := expression.ComposeCNFCondition(ctx, remainedExprs...)
CETraceExpr(ctx, tableID, "Table Stats-Expression-CNF", totalExpr, ret*float64(coll.Count))
}
return ret, nodes, nil
}
func getMaskAndRanges(ctx sessionctx.Context, exprs []expression.Expression, rangeType ranger.RangeType, lengths []int, cachedPath *planutil.AccessPath, cols ...*expression.Column) (mask int64, ranges []*ranger.Range, partCover bool, err error) {
isDNF := false
var accessConds, remainedConds []expression.Expression
switch rangeType {
case ranger.ColumnRangeType:
accessConds = ranger.ExtractAccessConditionsForColumn(exprs, cols[0])
ranges, accessConds, _, err = ranger.BuildColumnRange(accessConds, ctx, cols[0].RetType, types.UnspecifiedLength, ctx.GetSessionVars().RangeMaxSize)
case ranger.IndexRangeType:
if cachedPath != nil {
ranges, accessConds, remainedConds, isDNF = cachedPath.Ranges, cachedPath.AccessConds, cachedPath.TableFilters, cachedPath.IsDNFCond
break
}
var res *ranger.DetachRangeResult
res, err = ranger.DetachCondAndBuildRangeForIndex(ctx, exprs, cols, lengths)
if err != nil {
return 0, nil, false, err
}
ranges, accessConds, remainedConds, isDNF = res.Ranges, res.AccessConds, res.RemainedConds, res.IsDNFCond
default:
panic("should never be here")
}
if err != nil {
return 0, nil, false, err
}
if isDNF && len(accessConds) > 0 {
mask |= 1
return mask, ranges, len(remainedConds) > 0, nil
}
for i := range exprs {
for j := range accessConds {
if exprs[i].Equal(ctx, accessConds[j]) {
mask |= 1 << uint64(i)
break
}
}
}
return mask, ranges, false, nil
}
// GetUsableSetsByGreedy will select the indices and pk used for calculate selectivity by greedy algorithm.
func GetUsableSetsByGreedy(nodes []*StatsNode) (newBlocks []*StatsNode) {
slices.SortFunc(nodes, func(i, j *StatsNode) bool {
if r := compareType(i.Tp, j.Tp); r != 0 {
return r < 0
}
return i.ID < j.ID
})
marked := make([]bool, len(nodes))
mask := int64(math.MaxInt64)
for {
// Choose the index that covers most.
bestID, bestCount, bestTp, bestNumCols, bestMask, bestSel := -1, 0, ColType, 0, int64(0), float64(0)
for i, set := range nodes {
if marked[i] {
continue
}
curMask := set.mask & mask
if curMask != set.mask {
marked[i] = true
continue
}
bits := bits.OnesCount64(uint64(curMask))
// This set cannot cover any thing, just skip it.
if bits == 0 {
marked[i] = true
continue
}
// We greedy select the stats info based on:
// (1): The stats type, always prefer the primary key or index.
// (2): The number of expression that it covers, the more the better.
// (3): The number of columns that it contains, the less the better.
// (4): The selectivity of the covered conditions, the less the better.
// The rationale behind is that lower selectivity tends to reflect more functional dependencies
// between columns. It's hard to decide the priority of this rule against rule 2 and 3, in order
// to avoid massive plan changes between tidb-server versions, I adopt this conservative strategy
// to impose this rule after rule 2 and 3.
if (bestTp == ColType && set.Tp != ColType) ||
bestCount < bits ||
(bestCount == bits && bestNumCols > set.numCols) ||
(bestCount == bits && bestNumCols == set.numCols && bestSel > set.Selectivity) {
bestID, bestCount, bestTp, bestNumCols, bestMask, bestSel = i, bits, set.Tp, set.numCols, curMask, set.Selectivity
}
}
if bestCount == 0 {
break
}
// Update the mask, remove the bit that nodes[bestID].mask has.
mask &^= bestMask
newBlocks = append(newBlocks, nodes[bestID])
marked[bestID] = true
}
return
}
// FindPrefixOfIndexByCol will find columns in index by checking the unique id or the virtual expression.
// So it will return at once no matching column is found.
func FindPrefixOfIndexByCol(cols []*expression.Column, idxColIDs []int64, cachedPath *planutil.AccessPath) []*expression.Column {
if cachedPath != nil {
idxCols := cachedPath.IdxCols
retCols := make([]*expression.Column, 0, len(idxCols))
idLoop:
for _, idCol := range idxCols {
for _, col := range cols {
if col.EqualByExprAndID(nil, idCol) {
retCols = append(retCols, col)
continue idLoop
}
}
// If no matching column is found, just return.
return retCols
}
return retCols
}
return expression.FindPrefixOfIndex(cols, idxColIDs)
}
// CETraceExpr appends an expression and related information into CE trace
func CETraceExpr(sctx sessionctx.Context, tableID int64, tp string, expr expression.Expression, rowCount float64) {
exprStr, err := ExprToString(expr)
if err != nil {
logutil.BgLogger().Debug("[OptimizerTrace] Failed to trace CE of an expression",
zap.Any("expression", expr))
return
}
rec := tracing.CETraceRecord{
TableID: tableID,
Type: tp,
Expr: exprStr,
RowCount: uint64(rowCount),
}
sc := sctx.GetSessionVars().StmtCtx
sc.OptimizerCETrace = append(sc.OptimizerCETrace, &rec)
}
// ExprToString prints an Expression into a string which can appear in a SQL.
//
// It might be too tricky because it makes use of TiDB allowing using internal function name in SQL.
// For example, you can write `eq`(a, 1), which is the same as a = 1.
// We should have implemented this by first implementing a method to turn an expression to an AST
//
// then call astNode.Restore(), like the Constant case here. But for convenience, we use this trick for now.
//
// It may be more appropriate to put this in expression package. But currently we only use it for CE trace,
//
// and it may not be general enough to handle all possible expressions. So we put it here for now.
func ExprToString(e expression.Expression) (string, error) {
switch expr := e.(type) {
case *expression.ScalarFunction:
var buffer bytes.Buffer
buffer.WriteString("`" + expr.FuncName.L + "`(")
switch expr.FuncName.L {
case ast.Cast:
for _, arg := range expr.GetArgs() {
argStr, err := ExprToString(arg)
if err != nil {
return "", err
}
buffer.WriteString(argStr)
buffer.WriteString(", ")
buffer.WriteString(expr.RetType.String())
}
default:
for i, arg := range expr.GetArgs() {
argStr, err := ExprToString(arg)
if err != nil {
return "", err
}
buffer.WriteString(argStr)
if i+1 != len(expr.GetArgs()) {
buffer.WriteString(", ")
}
}
}
buffer.WriteString(")")
return buffer.String(), nil
case *expression.Column:
return expr.String(), nil
case *expression.CorrelatedColumn:
return "", errors.New("tracing for correlated columns not supported now")
case *expression.Constant:
value, err := expr.Eval(chunk.Row{})
if err != nil {
return "", err
}
valueExpr := driver.ValueExpr{Datum: value}
var buffer bytes.Buffer
restoreCtx := format.NewRestoreCtx(format.DefaultRestoreFlags, &buffer)
err = valueExpr.Restore(restoreCtx)
if err != nil {
return "", err
}
return buffer.String(), nil
}
return "", errors.New("unexpected type of Expression")
}
相关信息
相关文章
0
赞
热门推荐
-
2、 - 优质文章
-
3、 gate.io
-
8、 golang
-
9、 openharmony
-
10、 Vue中input框自动聚焦