harmony(鸿蒙)Burning

2022-08-09
浏览 (844)

Burning

Burning is the process of downloading compiled program files to a development board to provide a basis for subsequent debugging. With the one-click burning function of DevEco Device Tool, you can burn images on development boards quickly and efficiently.

Hi3861 V100 supports burning through the serial port. To burn source code through the serial port in Windows, perform the following steps:

Connect the computer and the target development board through the serial port and USB port. For details, see Introduction to the Hi3861 V100 Development Board.
If your computer does not have the USB-to-serial driver, install it by following the instructions in Installing the Serial Port Driver on Hi3861 V100.
In DevEco Device Tool, choose REMOTE DEVELOPMENT > Local PC to check the connection status between the remote computer (Ubuntu development environment) and the local computer (Windows development environment).
- If is displayed on the right of Local PC, the remote computer is connected to the local computer. In this case, no further action is required.
- If is displayed, click the connect icon.

en-us_image_0000001261395999

NOTE This operation is required only in remote access mode (in the Windows+Ubuntu hybrid development environment). If the local access mode (Windows or Ubuntu development environment) is used, skip this step.

Check the serial port number in QUICK ACCESS > DevEco Home > Device in DevEco Device Tool.

en-us_image_0000001216274840

Choose QUICK ACCESS > DevEco Home > Projects, and then click Settings.

en-us_image_0000001198943768

On the hi3861 tab page, set the burning options.
- upload_port: Select the serial port number obtained.
- upload_protocol: Select the burning protocol hiburn-serial.
- upload_partitions: Select the files to be burnt. hi3861_app is selected by default.

en-us_image_0000001243704061

In Partitions, check the preset burning settings of the files to be burnt.

en-us_image_000000131299335

To modify the burning settings for a specific file, click en-us_image_0000001312898911 next to the file.

en-us_image_0000001312912501

When you finish modifying, click Save on the top.
Click Open to open the project file. Then, choose PROJECT TASKS > hi3861 > Upload to start burning.

en-us_image_0000001216440138