harmony 鸿蒙telnet

telnet

This command is used to enable or disable the Telnet server service.

telnet [on|off]

Table 1 Parameter description

Parameter	Description	Value Range
on	Enables the telnet server service.	N/A
off	Disables the telnet server service.	N/A

Before enabling Telnet, ensure that the network driver and network protocol stack have been initialized and the NIC of the board is in the link up state.
Currently, multiple clients (Telnet + IP) cannot connect to the development board at the same time. > NOTICE
> Telnet is used for debugging and is disabled by default. Do not use it in formal products.

Run telnet on.

Command output:

OHOS # telnet on
OHOS # start telnet server successfully, waiting for connection.

0 赞

所属分类： 后端技术
本文标签：
版权声明： 原创文章如转载，请注明本文链接: https://m.seaxiang.com/blog/d3a38688b258427ebb411f65ebfa1d6a